Basic Info.
Product Name
Industrial Heating High Efficiency IR Far Infrared
Application of Baking Material Machine
Industry
Material of Baking Material Machine
Stainless Steel304
Heating Source
Electricity
Usage
Reduce Material′s Moisture
Installation
Engineer Guide
Color of Baking Material Machine
White/Gray
Transport Package
High Quality and Thick Wooden Case /Cartons.
Specification
temperature ranges: temperature + 10 º C ~ 30
Product Description
Device profile
Safety considerations
Be sure to read this manual carefully before installation, operation, maintenance and inspection. Be familiar with mechanical knowledge, safety information and all matters needing attention before proper use.
In this operating manual, the level of safety precautions can be divided into [danger] and [attention].
Danger when a dangerous situation occurs due to faulty operation, it may result in death or serious injury.
Note that dangerous conditions due to improper operation may result in moderate or minor injuries and damage to objects.
The items recorded on "notice" may have significant consequences depending on the circumstances.So by all means, be sure to abide by both.
After reading, please place it around the machine where it can be read at any time.
This equipment can produce the equipment of solid state capacitor priming process.Will rack car into the supply box and the move sent to the 1 contains the leaching tank, the vacuum contain leaching and then moved to the drying furnace, 3 period of drying process, and then moved to contain the leaching tank, 2 after vacuum including dip again moved to wipe again station, wipe away excess electrolyte then move to the 2 points 3 period of drying, drying furnace, then remove to receive a furnace on the automatic containing leaching of cleaning equipment.
Machine installation method
1. Inspect whether the mechanism is damaged or deformed due to improper loading and unloading.
2, Move the machine to the position, adjust the four corners of the machine foot bolt, make the wheels off the ground and use the leveler to correct the machine.Lock the nut of the gasket bolt after keeping the plane of the machine level.
3. Remove the tape and rope used for fixing everywhere, and do not connect to the power at this time.
4. Open the electrical box and confirm that there is no loose socket accessories.
5. Make sure that the electrical accessories are not immersed in water or oil and well insulated.
6. Wipe the anti-rust oil on the machine and all the flat feeding parts.
7. Put 40# lubricating oil on the parts with red paint on the machine.
8. Press the switch of the power box in the OFF position.
9. Connect to 220V power supply and make sure the green or yellow wiring is grounded.
10. Power ON, no fuse switch ON, confirm that DC24V voltage is normal. The first and second red indicator lights ON the power supply are ON, indicating that the power supply is normal.
11. Check whether the RUN light (green) on the PLC is on, and the light indicates normal.
12. Check the POWER light on PCB board to indicate that it is normal.
Safe use
1. Precautions for electric shock
dangerous
1, After the power OFF, must pass more than 2 minutes, to confirm the over-voltage test, can do wiring work or check, otherwise may cause electric shock.
2. Please confirm that the grounding wire in the power line is properly connected, otherwise there may be a risk of electric leakage or shock.
3, Wiring operation and inspection, please be operated by professional electrician.
4, Do not operate the switch with wet hands, or it may cause electric shock.
5, The cable can not be destroyed, strong pull, heavy weight, heavy clamp, otherwise may cause electric shock.
2. Precautions for fire prevention
Pay attention to
1. Do not touch the rotating part of the motor in operation.
2. When connecting the shaft end of the servo motor, please do not use hammer to strike, otherwise it may cause fault.
3, Wiring operation and inspection, please be operated by professional electrician.
4, Do not operate the switch with wet hands, or it may cause electric shock.
5, The cable can not be destroyed, strong pull, heavy weight, heavy clamp, otherwise may cause electric shock.
2. Precautions for fire prevention
Pay attention to
1. When the internal electrical components fail, the total power supply of the machine should be cut off,
2.so as not to cause fire due to the continuous flow of large current.
3. Precautions for injury prevention
Pay attention to
1. Do not apply voltage on each terminal other than the wiring diagram, otherwise it may cause rupture and damage.
2. Do not connect the terminals incorrectly when connecting, or it may cause damage or damage to other objects.
3. Do not reverse polarity, or it may cause damage or other items.
4. During the electrification or a short time after the power is cut off, the heat sink, regenerative resistance and various motors of the electrical components may be in a high temperature state. Do not touch them to avoid scalding.
4. Other matters needing attention
Please pay attention to the following points to avoid malfunctioning, dangerous or electric shock caused by wrong operation.
(1) transportation and installation
Pay attention to
Please carry the goods according to the weight in the correct way.
2. When installing, please follow the instructions and install it in a place that can bear the weight.
3. Do not allow conductive foreign matter such as metal sheet or combustible foreign matter such as oil to intrude into electrical parts or the interior of various motors.
Please keep and use in the following environment:
Environmental conditions
Electrical parts, servo motors, motors
Ambient temperature 0 to +40ºC (no freezing state)
Ambient humidity under 80% RH (no condensation)
Storage temperature: -15ºC to +60ºC (no freezing state)
Hold the humidity under 90% RH (no condensation state)
Inside the premises (where there is no direct sunlight)
Avoid corrosive gas, ignition gas, oil mist, dust environment.
Application of baking material machine
Suitable for automatic and continuous mass production in cooperation with the through operation of baking at
production line, such as: PC Board, aluminum board, resistance parts, nameplate printing and drying of resist-coat for thick-film IC, etc.
Hot sale modles for recommanding :
• 1. Q:Are you the factory or trading company?
• A:we are the factory, professional in manufacturing and R&D testing chamber equipments.
• 2.Q:Why choose us?
• A:We are the factory with own R&D team, we can provide you the relaible quality products while with reasonable price.
• 3.Q:How to get the quotation?
A:We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority
4.Q:How about your packing and shippment?
A:Products would be covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc. By Sea or by Air are available.
5.Q:What's the Payment method?
A:30% by TT or By Western Union in advance, 70% balance paid before shipment.
6. Q: Where is your factory ?
A: Our factory located in Changan town, Dongguan city, Guangdong, China.(Near by Shenzhen and Guangzhou)
Cooperated Customers
Contact :
Http:// jinyao-equipment.en.made-in-china.com
Http://jinyao-equipment.en.made-in-china.com
Company :Dongguan Jinyao Exactitude Equipment Co., Ltd
Address: Jingfu Road No 36, xiaobian village, changan town Dongguan City China
Send your inquiry details in the below,click "Send" now!
Thank you for enter into our website.If you find any product interesting,please feel free to contact me.It is my great pleasure to service for you
Address:
No 36 Jingfu Road, Xiabian Community, Changan Town, Dongguan, Guangdong, China
Business Type:
Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Packaging & Printing, Tools & Hardware
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Dongguan City Jinyao Exactitude Equipment Co., Ltd is one of Enterprise combining develop, produce and sale. Established in 1980, already have 30 years experience to produce: Precision Hot-air drying oven; IR/UV conveyor drying equipment; Environmental test equipment; Printing machine; Automation industrial equipment etc.
Our company always keep the aims that provide high quality product; Quick service attitude and the great design. We keep the company spirit that has advance technology and high quality team. Our product receive a lot of client trust, and stand firmly front of others.
Dongguan City Jinyao Exactitude Equipment Co., Ltd. Is registered capital achieve ten million RMB. It has 4800 square meters factory. More than three million RMB fixed assets. Value of output achieve 24million RMB each year.
We has the steady domestic clients such as: FOXCONN, HuohYow, FU BROTHRT industrial company, HUAXIN technology company, PUYAO group etc. It′s all about more than 500 company include Domestic, foreign and military enterprises. We also has the long-term relationship with Thailand, India and England.
The company toward higher, farther, more perfect operating system. The Taiwan Head Company as the axis, and we make efforts in mainland market development.
We stick to the principle of "service first, quality first" and develop our business heartfully and responsibly. We have technical person to check factories, to inspect products, and to communicate with manufacturers. We pay whole life responsibility to the products we sell to our clients.
We sincerely hope establishing long and friendly business relationship with clients from all over the world.